BOMANN GSP 7405 Bedienungsanleitung, Garantie Seite 35

General information!
• The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU
ecodesign legislation.
→ Informationen for the comparability test:
Capacity: 9 settings; Position of upper basket: lower position; Rinse aid setting: max; Softener setting: H3
• Loading the domestic dishwasher to the specified capacity helps to save energy and water.
• Manual pre-washing of the dishes leads to higher water and energy consumption!
• Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Operating overview
1 Power: button for switching the power supply
on/off. The indicator light shows the power supply.
2 Delay: button for selecting the start delay of 3,
6, 9 or 12 hours. Set the operating conditions and
start the rinsing program. The appliance starts au-
tomatically after the selected time has elapsed.
3 Program selector switch: to select a program, turn
the program selector switch to the corresponding
position. The program indicator lights show the
selection.
4 Start/pause: button for starting/interrupting the
selected or running rinsing program.
5 The indicator lights show the selection of the start
delay.
6 Warning lamp: lights up when rinse aid needs
to be refilled.
Warning lamp: lights up when dishwasher salt
needs to be refilled.
Starting a program
• The water supply must be opened to the maxi-
mum pressure.
• Load the dishwasher baskets.
• Fill in the detergent.
• Switch on the appliance.
• Set the required program options.
• Start the operation.
Changing the program
CAUTION:
A program change should only be done a short time
after the program start. Otherwise, cleaning agent
may already have been released and rinsing water
already drained off.
35