AVM FRITZ!Repeater 3000 AX Schnellstartanleitung Seite 20

Setting Up the Wi-Fi Connection
Action
Connect the FRITZ!Repeater to an outlet close to the FRITZ!Box
1
and wait until the Connect LED starts to flash slowly.
Start the connection to the FRITZ!Repeater: Press the Connect
2
button. The Connect LED flashes quickly.
Start the connection on your FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press
button briefly. The WLAN or Connect LED flashes.
3
• On a FRITZ!Box with the WLAN/WPS or WLAN button: Press
the button for about 6 seconds until WLAN starts flashing.
• On another wireless router, press the button that starts WPS.
As soon as the Connect LED on the FRITZ!Repeater lights up
permanently, the connection has been established.
4
If the Connect LED starts flashing slowly again, repeat steps 2
and 3 of these instructions.
When the connection has been established, reposition the FRITZ!Repeater.
Continue reading on
If the Wi-Fi connection cannot be established at the touch of a button, you will
find alternative instructions in the PDF manual at
20
page 22.
Illustration
2 minutes
en/avm.de/service.
Connect
Connect
within
Connect