6. Cleaning and Maintenance
NOTICE
During cleaning do not immerse the lid (A) in water or other liquids� Never hold the lid (A) under
»
running water�
Empty the product regularly, especially when collecting organic waste�
»
To clean the product, wipe with a soft, slightly damp cloth�
»
Wipe the product dry after cleaning�
»
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the
»
product�
Remove batteries if the product is to be stored unused for extended periods of time�
»
To remove batteries:
»
1�
Set the power switch (H) to O�
2�
Open the cover of the battery compartment (G)�
3�
Place a coin in the groove of the lock knob� Turn it clockwise to remove the lock knob�
4�
Remove one battery�
5�
By pushing the last battery out, the last 2 batteries are accessible to remove�
7. Frequently Asked Questions
Problem
The lid (A) does not open�
The lid (A) does not close��
The lid (A) opens slowly and the
indicator (D) flashes red.
1
3
5
Solution
Make sure that the batteries are installed correctly�
»
Wipe the sensor (C) with a dry cloth�
»
Use the control button (B) to close the lid (A)�
»
Make sure there is no obstructing object within the sensor area.
»
Wipe the sensor with a dry cloth�
»
Battery power is low� Change batteries�
2
4
EN
7