Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
•
It is strongly recommended that works on installing the camera and connecting +12 V should be done by qualified personnel with the necessary skills.
Cable routing may require special tools or attachments. Make sure these works are safe.
•
Put the microSD card into the DVR. Use a high-speed SD card (Class U3 or above); capacity should be 128GB max.
• To avoid malfunctions of the DVR and / or SD-card, don't insert and remove SD-card during DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card in Menu mode select Format SD-card
and confirm it.
•
Make sure the connectors are properly connected.
•
If the plug does not fully fit into the jack, or one of the pins is broken, the device may not function properly.
1.
The red wire (+) connects to the battery positive.
2.
Yellow wire, connects to ACC (ignition) 12V.
3.
The black wire (-) connects to the battery negative.
Note: Before connecting, it is recommended to check the power circuit with a multimeter. Incorrect connection may damage the device.
The video recorder has a degree of moisture protection IP66. It is recommended to install the device in the trunk (under the seat) of a motorcycle, metal side
up. For better cooling, the upper part of the case is made of aluminum.
NAVITEL M800 DUAL
+
ACC
| 21
EN
Werbung
Inhaltsverzeichnis
