Sustain; Vibrato; Transpose - Rockjam Rj361 Bedienungsanleitung

Sustain:

Touch the [SUSTAIN] button to enter Sustain mode. The LED display will briefly display [SUS] to indicate
sustain is on. Once this mode is selected the sound of each note played is prolonged. Touching the
[SUSTAIN] button again will turn the sustain feature off and exit this mode.
NOTE: In order to use the sustain pedal included then make sure that the sustain mode is switched off
then press the sustain pedal to sustain individual notes as required.

Vibrato:

Touch the [VIBRATO] button to enter Vibrato mode. The LED display will briefly display [Vib]] to indicate
that vibrato is on. Once this mode is selected each time a note is played a trembling effect is added to the
end of the note. Touching the [VIBRATO] button again will turn the Vibrato feature off and exit this mode.

Transpose:

Touching the [TRANSPOSE +/-] buttons alters the musical scale of the note being played. You can adjust
the scale by 6 levels upwards or downwards. Pressing both the [TRANSPOSE +/-] buttons at the same
time will make the musical scale revert to 00. The transpose level will be reset to 00 after power off and
on.
Page | 11