Tone; Tone Selection; Effect & Control; Split Keyboard - RockJAM RJ361 Bedienungsanleitung

Tone

Tone Selection:

When the keyboard is switched on the default TONE is ''000'' Grand Piano. To change the tone, touch the
TONE button first and then directly put in the number code on the keypad by pressing the corresponding
digits 0-9. The tones can also be changed by using the + / - buttons. Refer to Appendix III for a list of the
available tones.
1
2
Effect & Control

Split Keyboard:

To switch on Split Keyboard mode press the [SPLIT] button, the LED will show [SPL].
The keyboard will split into two keyboards at the 24th key from the left. You can adjust the TONE of the
right hand side of the keyboard by pressing the corresponding digits 0-9 on the numerical keypad. The
TONE of the left hand side of the keyboard will remain set to the tone chosen before the Split Keyboard
mode was entered. In Split Keyboard mode the pitch of the left hand keys are raised by one octave and
the right hand keys lowered by one octave. Press the [SPLIT] button again to exit Split Keyboard mode.
SPLIT KEYBOARD
DIVIDE POINT
TONE 1 TONE 2
Page | 10