First Start-Up; General Operating Instructions; Preparing The Remote Control - Imperial DABMAN i510 BT Bedienungsanleitung

6. FIRST START-UP

6.1 General operating instructions

› Switch the device on or off using the standby button on the Remote
control or on the device.
› You can use the
knob on the device to increase the volume.
› You can use the
on the device to decrease the volume.
› The menu items can be selected using the
control or using the knob on the device.
› You can confirm a selection in the menu by pressing the
remote control or by pressing the dial on the device.

6.2 Preparing the remote control

Remove the battery transport lock on the remote control. To do so, slide the
plastic slip out of the battery compartment of the remote control. . .
This establishes battery contact.
To replace the remote control battery, open the battery compartment on the
back of the remote control. Pull the battery compartment out of the remote
control. Remove the battery and insert a new battery of the same type.
1
VOL+ button on the remote control or turn the
VOL- button on the remote control or turn the knob
109
109
▼▲ buttons on the remote
OK
2
IMPERIAL ® DABMAN i510 BT
VOL+
E
button on the