iotty E2 PLUS Bedienungsanleitung Seite 31

3
Wire the iotty plate
Insert the power wire into terminal L. Insert the
neutral wire into terminal N. Connect the wires on
RL: insert the load wire in one terminal of RL and the
power wire in the other terminal of RL. Repeat the
operation on the other RLs if you need to use more
keys. If you have a ground wire, put insulating tape
or a hooded terminal to insulate it and place it into
the wall box. Compare the wiring with the electrical
scheme in the picture to be sure everything is in
place.
RL1
RL2
N
L
Main power supply 230 Vac
= Live/power
= Neutral
= Load/lamp
= Load/lamp
IOTTY
EN
31