3. Installation instructions
3.1 General requirements
The installation of the Bullerjan
hot air stoves and associated
®
chimney system must be installed in accordance with the relevant
public building safety codes, in particular the fireplace safety code
and the applicable Federal State regulations.
3.2 Combustion air supply
In any case, the room of installation should have a minimum volume
of 4m
/kW of rated thermal output.
3
The air supply for Bullerjan
hot air will be sufficient if the room
®
where the stove is located is provided by at least one door leading
into the open air and by a window which can be opened.
31