FAFREES FF20 Polar Benutzerhandbuch Seite 13

5.3 Walk assist mode
Long press and hold minus button, the electric bike enters the walk assist mode. The
electric bike will walk at a fixed speed of 6 km per hour and the display shows . Release
minus button to stop the power output immediately and restore to the state before walk
assist.
Figure 5-2 Walk assist mode interface
The walk assist mode can only be used when pushing the electric bicycle, please do not use
it while riding.
5.4 Turning on/off lights
Press the light button to make the controller turn on the lights and the display backlight
becomes dim. Press light button again to make the controller turn off the lights and the
backlight restore brightness.
Figure 5-3 Backlight display interface
10