Velleman NVR3 Kurzanleitung Seite 6

8.2 Device Status
Note: The functions shown may vary depending on the access user level.
key lock
channel lock
USB flash drive/device connected
timer recording on
overwrite on
sequence mode on
PTZ mode on
backup event queued, USB flash drive needed
CPU load
Network status
(WAN) internet connected
(WAN) local connection
(LAN) auto mode – Mbit/s
(LAN) DHCP / Static IP mode
8.3 Channel Status
Note: The functions shown may vary depending on the access user level.
auto search on
live audio on
recording
live information
quick camera control
8.4 Quick Menu Bar
Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:
Click to show the channel switch panel and select the channel you want.
Click to display the playback control panel, and click
click to enter the search list.
Click to open the IP search window and check the current connection status of each channel.
Click to show the power off panel to either halt or reboot the system.
V. 02 – 01/12/2014
NVR3
auto search off
audio off
PTZ control
playback information
6
key unlock
channel unlock
no USB device connected
timer recording off
overwrite off
sequence mode off
PTZ mode off
USB flash drive full
(WAN) internet disconnected
(LAN) auto mode – Gbit/s
(LAN) camera disconnected
original size
audio playback on
alarm event
digital zoom
to play the latest recorded video clip, or
fit to screen
audio playback off
motion event
channel playback
©Velleman nv