Storage And Maintenance - Merax FS-B-16 Benutzerhandbuch

Storage and Maintenance

Surface cleaning
Before cleaning, ensure the power switch is turned off, and the a�aching plug is
pulled out of the socket.
The rubber pedal and covers can be cleaned with a wet cloth containing detergent,
and the detergent should be removed with a Cloth.
No�ce
Do not clean the Product with corrosive detergent such as benzene or thinner, as
it may cause fading, corrosion or crack on the Product.
Do not splash water into the Product to avoid short circuit.
Controller
As wet cloth may cause malfunc�on of the controller, only dry cloth can be used.
Storage and Maintenance
Make sure that the power switch is turned off and the plug is removed from the
power supply.
Clean off the dust and dirt on the Product and keep it clean and away from places
with high temperature or high humidity.
If the Product is not in use for a long period, a dustproof cover (NOT INCLUDED)
should be applied on the Product to prevent the entry of dust.
Change of fuse
Turn the fuse base in the direc�on of the arrow (counterclockwise), and replace
the fuse with a clockwise screw back.
18