Hyundai HY55O8ANDROID Bedienungsanleitung Seite 29

your Local Contrast Control preference as Low,
Medium, High or turn it off by setting as Off.
Flesh Tone: Adjusts the skin tone brightness.
Set your preference as Low, Medium, or High
to enable. Set as Off to disable.
DI Film Mode: It is the function for 3:2 or 2:2
cadence detection for 24 fps film content and
improves the side effects (like interlacing effect or
judder) which are caused by these pull down me-
thods. Set your DI Film Mode preference as Auto
or turn it off by setting as Off. This item will not be
available if Game Mode or PC Mode is turned on.
Blue Stretch: Human eye perceives cooler whites
as brighter white, Blue Stretch feature changes
White balance of mid-high grey levels to cooler
colour temperature. Turn the Blue Stretch function
on or off.
Game Mode: Game mode is the mode which cuts
down some of the picture processing algorithms
to keep up with video games that have fast frame
rates. Turn the Game Mode function on or off.
ALLM: ALLM (Auto Low Latency Mode) function
allows the TV to activate or deactivate low latency
settings depending on playback content. Highlight
this option and press OK to turn the ALLM function
on or off.
PC Mode: PC Mode is the mode which cuts down
some of the picture processing algorithms to keep
signal type as it is. It can be usable especially for
RGB inputs. Turn the PC Mode function on or off.
De-Contour: Decreases the contour effects in
low-resolution content and auto streaming servi-
ces. Set your preference as Low, Middle, or High
to enable. Set as Off to disable.
MJC: Optimises the TV's video settings for
motional images to acquire a better quality and
readability. Highlight this option and press OK to
see available options. Effect, Demo Partition,
and Demo options will be available. Set the
Effect option to Low, Middle, or High to enable
the MJC function. When enabled, Demo Parti-
tion and Demo options will become available.
Highlight Demo Partition and press OK to set
your preference. All, Right and Left options will
be available. Highlight Demo and press OK to
activate the demo mode. While the demo mode
is active, the screen will be divided into two sec-
tions, one displaying the MJC activity, the other
displaying the normal settings for the TV screen.
If the Demo Partition option is set to All, both
sides will display the MJC activity.
HDMI RGB Range: This setting should be
adjusted according to input RGB signal range on
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Low Blue Light: Electronic device screens emit
blue light that can cause eye strain and may lead
to eye problems over time. To reduce the effect
of blue light set your preference as Low, Middle,
or High. Set as Off to disable.
Colour Space: You can use this option to set the
range of colours displayed on your TV screen.
When set as On, colours are set according to the
source signal. When set as Auto, the TV decides
to set this function as on or off dynamically, accor-
ding to source signal type. When set as Off, the
TV's maximum colour capacity is used by default.
Colour Tuner: Colour saturation, hue, brightness
can be adjustable for red, green, blue, cyan, magen-
ta, yellow and flesh tone (skin tone) for having more
vivid or more natural image. Set the HUE, Colour,
Brightness, Offset and Gain values manually. Hig-
hlight Enable and press OK to turn this function on.
11 Point White Balance Correction: White ba-
lance feature calibrates TV's colour temperature in
detailed grey levels. By visually or measurement,
grey scale uniformity can be improved. Adjust the
strength of the Red, Green, Blue colours and Gain
value manually. Highlight Enable and press OK to
turn this function on.
OLED: Displays OLED settings.
OLED Compensation: You can perform this pa-
nel maintenance operation manually to protect the
OLED panel and extend its life time. Panel noise
cleaning takes around 90 minutes and TV has to
be on standby mode during this operation. When
the confirmation screen is displayed, highlight Yes
and press OK to perform this operation immediate-
ly. Do not unplug the mains lead during this period.
It is not recommended to perform this operation
more than once a year or unless requested by
authorised service personnel. Refer to the OLED
TV Operations section for more information
before you perform this operation.
Manual OFF-RS Compensation: This operation
will take about 15 minutes and in order not to
interrupt it is recommended to wait until the ope-
ration is completed. Highlight and press OK. When
the confirmation screen is displayed, highlight Yes
and press OK to perform this operation. Refer
to the OLED TV Operations section for more
information before you perform this operation.
Pixel Shift: The images will be automatically
shifted every 80 seconds to prevent image stic-
king. Highlight this option and press OK to turn
this function on or off. Refer to the OLED TV
English - 20 -