Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
+00DE93419101-1_00Ta.book Page 4 Wednesday, February 9, 2011 5:27 PM
LN INTERFACE
3
Before Installation
Check the following package contents.
No.
1
LN interface
2
Installation Manual
3
Screw
4
Clamp filter
5
Tie-wrap
Use the following wiring materials to connect the signal lines and power lines. (Locally procured)
No.
Line
1
For TCC-LINK
2
For L
W
®
ON
ORKS
3
For power
4
Installation
Installation Method and Orientation
There are five installation methods as
shown in the figure: surface mount and wall
mount.
Do not install the unit in any other
orientation.
Use the attached screws.
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight or at a high temperature
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
Installation Space and Maintenance Space
A side space for connecting through cable inlets and an upper space for maintenance
must be reserved before installation.
The other sides can be adjacent to surrounding objects.
Item
Type
2-core shield wires
Wire size
1.25 mm
2.00 mm
Length
Type
Twisted pair shield cable (dedicated cable or equivalent)
Wire size
0.65 mm × 1P
Free topology : 500 m max. (total length)
Length
Bus topology : 1000 m max.
Type
H07 RN-F or 245IEC66
0.75mm
Wire size
– 4 –
Quantity
1
1
4
M4 x 12mm tapping screws
1
1
For fixing the clamp filter
Description
2
, 1000m max.
(total length including air conditioner
2
area)
, 2000m max.
2
, 50 m max.
Good
Installation Manual
Remarks
No good
100mm
100mm
4-EN
Toshiba
EN
Werbung
Inhaltsverzeichnis
