Maintenance; Storage; Disposal - P.Lindberg 9040168 Bedienungsanleitung

Maintenance

Clean the equipment after use. Remove dirt and other debris.
Regularly lubricate the power transmission shaft at the grease nipples. Use universal grease.
Check the gear oil level. Refill if necessary.
The gear oil should be changed once a year.
Note: The safety bolt may only be replaced with a corresponding bolt with the same tensile
strength after breakage.

Storage

Before storing the equipment, it should be cleaned, and metal parts should be lubricated with a
thin layer of rust-protective oil.
The equipment should be stored in a dry place, out of reach of children and unauthorized
personnel.

Disposal

The equipment should be disassembled, and the individual parts should be sorted and disposed of
according to local guidelines.
10
MAN 9040168 EN V3
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70 21 26 26 DK-6600 Vejen E-mail: salg@p-lindberg.dk