Herunterladen Inhalt Inhalt Diese Seite drucken

Equipment Identification - Epta IARP FENICE 10.3 Gebrauchs- Und Bedienungs Anleitungen

Vitrine für handwerkliches eis
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
INSTALLATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft-cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
Check that the voltage on the identification plate is
the same as that of the network.
Place the counter in horizontal position on a clean
surface, away from sources of heat (radiators, ovens,
etc) icluded sun rays and away from draughts (for
example fans, air conditioning ducts).
It is necessary taht the condensing unit obtains a good
circulation of air around it.
Also the area around the condensing unit should not
be obstructed by boxes or other objects.
Do not install the unit in open places and do not
expose it to rain.
Never use electrical equipment in the refrigerated
compartment.
Never place containers of liquid on or immediately
above the ticket counter; should the content spill
out, it would damage the counter.
Install and position the unit in such a way so as to allow easy access to the power socket.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATION.
Operation is regular with ambient temperature indicated on technical data plate.

EQUIPMENT IDENTIFICATION

Located on the plate affixed to the machine to detect the technical data.
Check the model and power supply voltage before carrying out any operation.
If discrepancies are found, immediately contact the manufacturer or the company that supplied
the equipment.
1. Manufacturer
2. Code
3. Conformity marking
4. Power supply voltage (V)
5. Power supply frequency (Hz)
6. Absorbed electrical power (W)
7. Absorbed electrical power in defrosting (W)
8. Light max. power (W)
9. Gross volume
10. Type and quantity of refrigerant
11. Climate class
It is strictly forbidden to remove, tamper with the plate and change
or alter the data contained in it.
1
5
4
8
-14-
2
6
10
7
11
9
11
3
* Plate example

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Iarp fenice 13.3

Inhaltsverzeichnis