Music Playback; Music Control; Hands-Free Function - fontastic Bows Bedienungsanleitung

GB
Note: If the connection is lost or the transmitter is
disconnected for a short time, Bows will automati-
cally try to reconnect.
TWS function
The TWS function allows you to connect the two
Bows speakers together to output your music in
stereo through two speakers. To connect two Bows
together, turn on both units. Press the power button
on one of the speakers three times. The two
speaker units will connect to each other. An acoustic
signal indicates a successful connection.

Music playback

A Bluetooth source must be paired with Bows to
®
receive and output music wirelessly!
Note: The cell phone must support A2DP and
9
AVRCP profile to play and control music via Bows.

Music control

To play or pause music, briefly press the power
button .
To skip to the next track, press and hold the next track
button for two seconds.
To skip to the previous track, press and hold the
previuos track button

Hands-free function

With a built-in microphone (6), the speaker is suitable
to be used as a hands-free speaker for phone calls
via a connected phone.
Note: At high volume, feedback with the micro-
phone may occur. This results in echo on the
for two seconds.