Dab / Dab+ Mode - Millarco BOXER Gebrauchsanweisung

DAB / DAB+ MODE:

1. Power on the earmuff and select DAB+ mode using the [Mode].
2. Then press the [LIS/Phone] to auto-scan for DAB+ station, the detected
station will be saved to the device.
3. Press [Select Down]/ [Select Up] to switch between saved DAB+ stations.
4. Press [Mode] more than 3 seconds until there are"<" ">"on the screen, then
press [Select Down]/ [Select Up] to select manual scan menu, press [Mode]
to confirm the menu. Then press [Select Down]/ [Select Up] to adjustment
the frequency by hand, press [Mode] to confirm the adjustment and save it,
finally press [Mode] more than 3 seconds to quit manual adjustment.
Note: Earmuff will hold the last used station to enjoy next time without searching.
BLUETOOTH MODE:
1. Open Bluetooth on your mobile phone.
2. Power on the earmuff and select Bluetooth mode.
3. In your Bluetooth device's setting, select the ear muffs and connect.
4. Once paired, BT logo stop flicking.
5. Press the [LIS/Phone] to play/pause the music.
6. Press the [Select Down]/[Select Up] to skip forward/backwards between
songs.
RECEIVING PHONE CALLS:
While the Bluetooth earmuff is paired with your smart phone, answer an
incoming call by pressing [LIS/Phone]. To end the call, press again the [LIS/
Phone].
RADIO MODE:
1. Power on the earmuff and select Radio mode using the [Mode].
2. Then press the [LIS/Phone] to auto-scan for a FM radio station, the detected
radio station will be saved to the device.
3. Press [Select Down]/ [Select Up] to switch between saved radio stations.
4. Press [Mode] more than 3 seconds until there are"<" ">"beside the
frequency, then press [Select Down]/ [Select Up] for precise adjustment on
the frequency by hand. Press [LIS/Phone] to confirm the adjustment and
save it.
Note: Earmuff Radio will hold the last used radio station to enjoy next time
without searching.
42