Getting Started - Millarco BOXER Gebrauchsanweisung

Operating instructions
PARTS:
1. Mode
2. Select up
3. Select down
4. Listening mode (LIS)/Phone
5. Volume/On/Off
6. Micro USB charging port
7. LCD display
8. AUX in
9. Power/charging indicator
CHARGING EARMUFF:
Before use, charge the earmuff using the
included micro USB charging cable on power
off, connect earmuff to a USB port for
approximately 5 hours. When the battery is
full , the red working LED goes out. The LCD
screen shows as full too when power on.

GETTING STARTED:

1. Turn the [Volume/On-Off] clockwise to power on the earmuff.
2. Press the [Mode] to switch between DAB+ / FM Radio / Bluetooth modes.
3. Adjust the volume as needed on earmuff using the dial.
4. Turn the [Volume/On-Off] counter-clockwise to power off the earmuff.
1
2
3
4
5
6
7
8
9
41