The Device; Battery Information - SACKit Touch 400 Gebrauchsanleitung

THE DEVICE

How to use Bluetooth
1 . Long press the power on/off button for 10 sec . After the first 5 sec ., you will hear the "ON" sound .
Keep pressing the button for another 5 sec . to turn on pairing mode, indicated by flashing the
power indicator red and blue .
2 . Go to the Bluetooth settings on your device and make sure Bluetooth is turned on .
3 . Look for "SACKit Touch 400" in the list of bluetooth devices .
4 . When it appears, tap the name to pair . The speaker emmits a confirmation voice saying: "Connec-
ted" as soon as it is paired .
5 . Your device is now connected to SACKit Touch 400 and you can enjoy your music .
6 . The music can be paused / played by pressing the Power button .
7 . SACKit 400 will automatically pair with the last connected device .
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunities won't appear on the new device .
Operation instructions for use after first pairing.
1 . After first pairing your SACKit Touch 400 and your bluetooth device will be conncted automatically
2 . Bluetooth device will automatically reconnect, the LED light will blink blue once SACKit Touch 400
is succesfully paired .
3 . Turn the headphones on by holding down the "X button" until you hea the "ON" sound .
4 . Long press "on/off" to turn off SACKit Touch 400 .
• NOTE: If the pairing is not succesfull, please turn the headphones oof and back on and retry pairing .
Operation instructions for in-line use
Use the 3 .5mm audio cable when you do not wish to use Bluetooth connection . In-line use is also pos-
sible
when the headset is turned off .
For in-line use:
Use the 3 .5mm audio cable when you do not wish to use Bluetooth connection . In-line use is also pos-
sible when the headset is turned off .

Battery information

• Battery: rechargeable Polymer Lithium-Ion Battery, 500 mAh .
• Power: 5V DC 1A via USB-C . Please use the USB cable sealed with our headphone for charging
• Charging Time: Please be sure the battery has been fully charged before first use . It can take up to
3 hours of charging the first time, but 2 hours normally with a 5V 1A adapter .
How to use the Active Noise Cancellation function
1 . Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the
headphones in Active Noise Cancellation mode
2 . When you don't need the Active Noise Cancellation function, turn the ANC function of by pus-
hing the ANC button .
3 . Active Noice Cancellation can be activated and deactivated even when the SACKit Touch 300
Headphone is turned off . The Active Noise Cancellation will also remain on even when you turn
the SACKTouch 300 Headphone off .
6