OCEAN DRIVE E9 PRO Gebrauchsanleitung Seite 98

11. ASSEMBLING THE E-SCOOTER
- After removing the e-scooter from the packaging and checking that everything is compliant with
what is indicated in paragraph "8", it is necessary to assemble the dismounted components.
a• Open the kickstand (2) and position the e-scooter on a flat surface.
b• Raise the handlebars stem (7).
c• Raise the locking lever (6) and push it against the handlebars stem (7) until a hooking "click"
is heard.
d• Insert the handlebars (9) on the handlebars bar (7).
Use the Allen wrench (e) to tighten the screws (d) on both sides.
9
7
d
e
7
6
7
EN
2
7
97