Troubleshooting; Frequently Asked Questions (Faq) - AgfaPhoto PPS 600Pro Bedienungsanleitung

9. TROUBLESHOOTING

If your devices are not recharging as they should using AgfaPhoto PPS 600Pro follow these steps:
1. Ensure the device has been switched on and the LCD-Display is showing a remaining charge.
2. Check the battery indicator. If it is at 20% or below, recharge your AgfaPhoto PPS 600Pro.
3. Verify your device is suitable for use with the AgfaPhoto PPS 600Pro.
a. All AgfaPhoto PPS 600Pro output ports have their own max. power. Check the AgfaPhoto PPS
600Pro's technical specifications to ensure your device is compatible.
b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when
in use. In these cases, power down your device and recharge it.
What should I do if the unit gets wet?
Immediately turn off the unit and wait until you are certain that it is completely dry before turning it
back on. If you are unsure about when it is safe to turn it back on, please contact after sales service.

10. FREQUENTLY ASKED QUESTIONS (FAQ)

1. What type of battery is in my AgfaPhoto PPS 600Pro?
AgfaPhoto PPS 600Pro contains a 644 Wh lithium ion battery pack. Lithium ion batteries are much
smaller and lighter than normal lead-acid batteries and also can be cycled many more times.
2. How do I turn off the AgfaPhoto PPS 600Pro?
This product has an intelligent USB port detection function. If no devices are connected or connected
devices are fully charged, the USB ports are automatically switched off. However, the AC outputs and
DC outputs must be switched off manually. Long press the AC button and the DC button at the same
time to switch off all outputs.
3. Can I charge the AgfaPhoto PPS 600Pro while supplying power at the same time?
yes. All outputs support simultaneous charging and discharging. Please note, however, that this only
makes sense with a remaining battery capacity of more than 10%.
4. Can I take my AgfaPhoto PPS 600Pro on a plane?
No!
34