Troubleshooting - AgfaPhoto POWERCUBE 100Pro Bedienungsanleitung

Best-use
• When recharging devices with AgfaPhoto POWERCUBE 100Pro, you should take note of the battery
indicator.
• If you plug in devices that have a high power requirement, the charge level of AgfaPhoto POWER-
CUBE 100Pro can drop quickly and you will not be able to extract the entire 88.8Wh of energy.
• On the other hand, if you're charging devices that draw power more slowly (tablet or smartphone),
you will be able to extract close to the full 88.8Wh from AgfaPhoto POWERCUBE 100Pro. If yor're
experiencing shorter times, you can check the device's power requirement.
• When the AC port is not in use, turn it off to save power.
Appropriate temperature usage
• Charge protection: AgfaPhoto POWERCUBE 100Pro can charge your device when the ambient
temperature is between -10 - 40°C. Outside this temperature range, the system automatically
stops charging but will restart once the temperature is back inside the acceptable range.
• Discharge protection: AgfaPhoto POWERCUBE 100Pro can power your devices when the ambient
temperature is between -10 - 40 °C. Outside this temperature range the system automatically stops
charging your device but will restart once the temperature is back inside the acceptable range.
Make sure that the electronic device you are powering works properly prior to use.
The max. power consumption for electronic devices is 80W continuous and 120W peak.
Due to the different types of electric devices, it is possible that they may not operate even if

9. TROUBLESHOOTING

If your devices are not recharging as they should using AgfaPhoto POWERCUBE 100Pro follow the-
se steps:
1. Ensure the device has been switched on and the battery indicator is showing a remaining charge.
2. Check the battery indicator. If it is at 20% or below, recharge your AgfaPhoto POWERCUBE 100Pro.
3. Verify your device is suitable for use with the AgfaPhoto POWERCUBE 100Pro.
a. All AgfaPhoto POWERCUBE 100Pro output ports have their own max. power. Check the AgfaPho-
to POWERCUBE 100Pro's technical specifications to ensure your device is compatible.
b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when
in use. In these cases, power down your device and recharge it.
What should I do if the unit gets wet?
Immediately turn off the unit and wait until you are certain that it is completely dry before turning it
back on. If you are unsure about when it is safe to turn it back on, please contact after sales service.
ATTENTION
their power consumption is less than 80W.
33