Loading Paper; Keyboard Layout - Olivetti Summa 21 Bedienungsanleitung

Loading paper

1. Push the printer cover upward so as to remove it from the case.
2. Allow the paper holder to click into place.
3. With a pair of scissors, cut the edge of the paper roll straight across so that the
paper can feed properly through the printer mechanism.
4. While holding the paper roll in one hand, feed the paper from the bottom of the
roll and then insert the leading edge of the paper into the paper slot at the back
of the machine.
5. Turn on the power switch and press the "Paper Feed" key to feed in the paper
until it appears through the printer.
6. Place the paper roll on the paper holder and return the printer cover to the
original position.
Note:
To remove the paper roll from the printer mechanism, pull the roll forward after
cutting the paper on the paper roll side.
Do not let the paper strip sag between the roll and the insertion slot. If the paper
strip sags, it will not advance smoothly and completely.
Press the Feed key and cut the paper after you calculate.

Keyboard Layout

ENGLISH 3