Schwaiger DTA4000 Bedienungsanleitung Und Sicherheitshinweise Seite 18

USER GUIDE
Connection example 2
CONNECTION EXAMPLE 2
Power supply via the supplied external power supply unit
1. Make sure that the DVB-T(2) receiver is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial connection port on the
Power inserter.
3. Now plug the cable of the external power supply unit into the socket of the
power inserter and the external power supply unit into a 230 V AC socket.
4. Connect the coaxial cable of the power inserter to the aerial input of your
DVB-T2 receiver.
5. When making this connection, it doesn't matter whether the 5 V power
supply of the DVB-T2 receiver is activated or not.
6. You can now turn on the television set and the DVB-T(2) receiver.
7. You can now look for channels that you can receive. If necessary, refer to
the DVB-T2 receiver's user manual for guidance.
Power inserter
Power supply unit
Receiver
TV
18