Schwaiger DTA4000 Bedienungsanleitung Und Sicherheitshinweise Seite 17

CONNECTING THE OUTDOOR AERIAL FOR TV SETS
WITHOUT INTEGRATED DVB-T(2) RECEIVER
Connection example 1
CONNECTION EXAMPLE 1
Power supply via the DVB-T(2) receiver
1. Make sure that the television set is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial connection port on the
DVB-T(2) receiver.
3. You can now turn on the television set and the receiver.
4. In the menu of the DVB-T2 receiver, switch on the 5 V power supply to pow-
er the amplifier integrated in the aerial through the coaxial cable.
5. You can now look for channels that you can receive. If necessary, refer to
the television's user manual for guidance.
USER GUIDE
Receiver
TV
17