Schwaiger DTA4000 Bedienungsanleitung Und Sicherheitshinweise Seite 16

USER GUIDE
Connection example 2
Power supply unit
CONNECTION EXAMPLE 2
Power supply via the supplied external power supply unit
1. Make sure that the television set is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial connection port on the
Power inserter.
3. Now plug the cable of the external power supply unit in the socket in the
Power inserter and the external power supply unit into a 230 V AC socket.
4. Connect the short coaxial cable of the power inserter to the aerial input of
your TV set.
5. When making this connection, it doesn't matter whether the 5 V power
supply of the TV is activated or not.
6. You can now turn on the television set and look for channels that you can
receive. If necessary, refer to the television's user manual for guidance.
Power inserter
TV
16