notEs
3.
The adapter does not require any configuration.
Depending on the operating mode, configura-
tions for the camera can be carried out via the
SIP Call Station 3.0 or via the web front end of
the camera.
www.behnke-online.com
Instructions Behnke adapter for USB camera/IP-intercom stations
tEchnIcal Data
4.
Supply voltage:
▸
12 volt = from SIP intercom 3.0
Power consumption from USB port:
▸
0,5 W
Power consumption from 12 V=
from SIP intercom 3.0:
▸
3 watts
Max. Leistung für POE:
▸
3 watts
GB
Notes
15