Instructions Behnke adapter for USB camera/IP-intercom stations
GB
Introduction
IntRoDuctIon
1.
1.1. What's in the box
▸
USB to LAN-Adapter 43-9300
▸
This manual
1.2. General informations
The supplied USB to LAN adapter is used exclu-
sively for connecting a Behnke network camera
to the USB extension port of the SIP intercom
IP 3.0 (20-0001B-IP, 20-0014B-IP, 20-0016B-
IP). The adapter generates the power supply
for the camera (PoE, max. 3 watts) from the
12V=voltage supplied by the basic electronics
12
1.3. Connections to Behnke network
camera
Camera: RJ45
1
USB: 4-pole HPI connector for
2
Behnke IP basic electronics 3.0
12V: 2-pole HPI connector for
3
Behnke IP basic electronics 3.0
3
2
www.behnke-online.com
1