Fixing The Usb To Lan Adapter - behnke 43-9300 Anleitung

Instructions Behnke adapter for USB camera/IP-intercom stations
GB
Installation

2.2. Fixing the USB to LAN adapter

Mount the USB to LAN adapter on the basic electronics 20-001B-IP and 20-0014B-IP as shown in the
two examples. To do this, use the fastener on the USB to LAN adapter. When using the 20-0016B-
IP basic electronics, the USB to LAN adapter must be connected directly to the basic electronics
(limited by the connection lines 2 and 3, see also page 5). The connection cable
camera can be extended by max. 1 mtr. with the network cable supplied with the Behnke IP camera
as described on page 5.
1
Attachment for Intercom station size 3
14
Attachment for Intercom station size 4
square (inside)
1 to the Behnke IP
1
www.behnke-online.com