Werbung
•
Be careful when adjusting the position of the tray, the footrest and
when unfolding or folding the chair, as there is a risk of pinching your
fingers.
•
Use the tray always in combination with safety belts! The tray is not
intended to protect the child from falling.
•
Never lift, move, fold, adjust or repair the seat when there is a child in
it. This can injure the child.
•
Always before use, check the functioning of the locking mechanisms.
•
Before placing the child in the seat, make sure that it is fully unfolded
and locked in the open position and that all locking mechanisms are
tightly closed! This will prevent the child from being injured by sudden
folding of the chair.
IMPORTANT! The diagrams and figures in this instruction are illustrative and
indicative only. Follow exactly the instructions and sequence for assembling
and operating with the product.
Check the securing of the fixation after each operation. Fixing a certain position
in most cases is accompanied by a clicking sound.
Components - illustration A
Seat compartment; 2. Upper support frame set – 2 pieces (left and right); 3.
Front support tube (leg); 4. Rear support tube (leg); 5. Double tray; 6.
Upholstered seat together with a 5-point seat belt.
Product assembly – illustration B
Assemble the seat by inserting the upper support frames, left and right, into
the seat coupling holes in the direction of the arrows (see Figure B.1). You have
to hear a clicking sound. Install the front and rear support tubes to the
assembled seat frames as shown in Figures B.2 and B.3.
Tray (3 positions) – illustration C
The tray can be adjusted in 3 positions. Pull the button located at the bottom
of the tray and move it to the desired position.
Attention! Use the tray always in combination with safety belts! The tray is not
intended to protect the child from falling.
Seat height and backrest inclination – illustration D
ASSEMBLY INSTRUCTIONS
15
Werbung
