Defrosting; Replacing Of The Illuminant - Wolkenstein EWTS85-36ED Bedienungsanleitung

1. Use a moist cloth and a mild, non-acidic detergent. Use a suitable detergent for
stubborn stains.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
1. Clean shelves and the inside with warm water and a mild detergent.
2. To clean wooden shelves, use a cleaning detergent suitable for wood only.
3. Use clear water to rinse.
4. Dry the cleaned surfaces with a cloth.
5. Check the water drain and clean it if needed.
➢ Clean with warm water and a mild, non- acidic detergent. Do not restart the
appliance until the door seals have dried completely.
➢ Clean the drain hole at the back of the cooling
compartment periodically; otherwise defrost water can get
into the cooling compartment. Use a suitable device such
as a pipe cleaner.

7.1 Defrosting

1. The appliance is equipped with an automatic defrost-system.
2. The water is drained at the back inside the appliance.
3. The water is collected in a container underneath the compressor. The water
evaporates in this container
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.

7.2 Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a qualified
professional (electrical technician) only. If the LED-illuminant is damaged,
please contact a qualified professional (not covered by the guarantee).
Depending on model.
22
E
XTERNAL CLEANING
I
NTERNAL CLEANING
D
OOR SEALS
D (depending on model)
RAIN HOLE
22
~ ~
69