BOMANN GSP 7410 Bedienungsanleitung, Garantie Seite 35

General information!
• The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU
ecodesign legislation.
→ Informationen for the comparability test:
Capacity: 14 settings; Position of upper basket: lower position; Rinse aid setting: max; Softener setting: H3
• Loading the domestic dishwasher to the specified capacity helps to save energy and water.
• Manual pre-washing of the dishes leads to higher water and energy consumption!
• Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Operating overview
1 Power: button for switching the power supply
on/off.
2 Delay: button for selecting the start delay of
1-24 hours. Set the operating conditions and start
the rinsing program. The appliance starts auto-
matically after the selected time has elapsed.
3 Program: button for selecting the rinsing pro-
gram.
4 Loading: button for activating/deactivating the
½ loading function. Consider that the function is
program dependent!
5 The program indicator lights show the selection.
6 Warning lamp: lights up when rinse aid needs
to be refilled.
Warning lamp: lights up when dishwasher salt
needs to be refilled.
7 The indicator lights show the program sequence:
pre-rinse → main rinse → rinse → drying
→ program end
Starting a program
• The water supply must be opened to the maxi-
mum pressure.
• Load the dishwasher baskets.
• Fill in the detergent.
• Switch on the appliance.
• Set the required program options.
• Close the appliance door to start the rinsing pro-
gram.
35