BOMANN GSP 7411 IX Bedienungsanleitung, Garantie Seite 35

Extra drying function: Additional drying process to the previously set rinse program.
 The function is not available for the programs "Rapid" and "Soak".
NOTE:
*ECO program is the test cycle. The information for comparability test
General information!
• The ECO program is suitable for cleaning normally soiled dishes, which is the most efficient program in
terms of combined energy and water consumption. The program is used to check compliance with EU
ecodesign legislation.
→ Informationen for the comparability test:
Capacity: 9 settings; Position of upper basket: lower position; Rinse aid setting: max; Softener setting: H3
• Loading the domestic dishwasher to the specified capacity helps to save energy and water.
• Manual pre-washing of the dishes leads to higher water and energy consumption!
• Washing dishes in a household dishwasher generally uses less energy and water than hand washing,
provided the dishwasher is used according to the instructions.
Operating overview
1 Power: button for switching the power supply
on/off.
2 Delay: button for selecting the start delay of
1-24 hours. Set the operating conditions and start
the rinsing program. The appliance starts auto-
matically after the selected time has elapsed.
3 Extra drying: button for activating/deactivating
the extra drying function. Consider that the func-
tion is program dependent!
4 Child lock: keep pressing button combination
for several seconds to activate/deactivate the
in accordance with EN60436
child lock. All buttons, except power button, are
locked for operation.
5 Loading: button for activating/deactivating the
½ loading function. Consider that the function is
program dependent!
6 Program: button for selecting the rinsing pro-
gram.
7 Start/pause: button for starting/interrupting the
selected or running rinsing program.
8 The program indicator lights show the selection.
35
.