Other Functions; Explanation Of Symbols - XTRONIC ACT909962476 Bedienungsanleitung

- In the time display mode, short press "SET" twice to show the Night mode on (show ON) and off (show
OFF), default "OFF", time period 18:00~6:00 automatically into the low-light display, press "DOWN" or
"UP" to select ON or OFF.
- In night mode "ON" display, long press "SET" to enter the interval time setting, setting order: start hour-
start minute-finish hour-finish minute. Start the hour and minute setting, the top of the COOL two points
lights up, finished the hour and minute setting, the bottom of the COOL two points lights up.
G. OTHER FUNCTIONS:
- Bright, Dark control: turn on or re-set default brightness, single press "UP" cycle to switch between light,
medium, dark, off four brightness options.
- If you do not press the button for 10 seconds, the current setting will be confirmed automatically. Return
to time mode.
- Press "UP" for 2 seconds, can choose or cancel Time/Date display alternately mode.
- Suggest to use QC 3.0 Adapter with output 5V/2A or 9V/2A or 12V/1.5A.

EXPLANATION OF SYMBOLS

This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental
safe recycling.
Declaration of Conformity. Products marked with this symbol comply with all the applicable
Community regulations of the European Economic Area.
Read operators manual.
The packaging can be reused or recycled. Please dispose properly of any packaging material
no longer required. If you notice any transport damage during unpacking, please contact your
dealer without delay.
Qi Certification is the WPC' s product certification program for wireless charging devices. The
WPC uses a network of independent authorized test labs around the globe that test specific
properties for safety, interoperability, and usability, each of which can involve multiple test
procedures. Only Qi-Certified products are allowed to carry the Qi logo.