Safety Information - XTRONIC ACT909962476 Bedienungsanleitung

EN

SAFETY INFORMATION

The following safety precautions should always be observed to minimize the risk of electric shock, personal
injury, or fire. It is important to read all of these instructions carefully before using the product and to keep
them for future reference.
WARNING
When using this product, basic precautions should always be followed, including the following:
1. Do not use on an aircraft or in a hospital.
2. To reduce the risk of injury, close supervision is necessary when the product is used near children.
3. Do not expose the device to any moisture.
4. Do not use the device in excess of its output rating. Overloaded outputs above rating may result in a
risk of fire or injury.
5. Do not use the device if damaged or modified. Damaged or modified device may exhibit unpredictable
behavior resulting in fire, explosion or risk of fire or injury.
6. Do not disassemble the device. Seek assistance from a qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of fire or injury.
7. Do not expose the device to fire or excessive temperature. Exposure to extreme heat may cause
explosion.
8. Have servicing performed by a qualified repair person using only identical replacement parts to ensure
that the safety of the product is maintained.
9. The device is not a toy.
10. Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged.
Never charge for more than 7 hours at a time.
11. Attachments on the back of your phone can impede the effectiveness of the wireless charge, and lead
to overheating. Please remove attachments from the phone before charging on this device.
KEEP OUT OF REACH OF CHILDREN.
CHECK IF THE PACKAGING FOR THE FOLLOWING ITEMS: ALARM CLOCK WITH WIRELESS CHARGING
PAD, USB CABLE AND MANUAL.
SPECIFICATION
- LED time
- Light, medium, dark, off four brightness options. The default is light
- 3 function buttons: SET, UP, DOWN
- Date display, showed "Day Month", the default is 2022 year 1st Janunary, date range is from 2022-2099
- 4-bit time display, hour, minute
- At start up, displays the Time/ Date alternately, when Time display 10 seconds then exchange to Date
display 5 seconds; When Time/ Date display alternately, press "UP" for 2 seconds, with buzzer "BI", then
cancel display alternately mode, enter Time display mode.