XTRONIC ACT909962476 Bedienungsanleitung Seite 5

OPERATION INSTRUCTIONS
A. TIME SETTING:
- In time display mode, press "SET" for 2 seconds to enter set up mode, in order "12/24H hour- minute".
- When setting, single press "UP", single step forward; press "UP" for 2 seconds, 8 steps/second forward. Single
press "DOWN", single step backward; press "DOWN" for 2 seconds, 8 steps/ second backward. If do not press
the button for 10 seconds, the current setting will be confirmed automatically and return to time mode.
- In setting mode, the object you set is displayed blinking.
- Mark: When alarm is turned on, the alarm symbol cannot be displayed when setting the clock.
B. DATE SETTING:
- In date display mode, press "SET" 2 seconds to enter set up mode, in order "year-month-day".
- When setting, single press "UP", single step forward; press "UP" for 2 seconds, 8 steps/second forward.
Single press "DOWN", single step backward; press "DOWN" for 2 seconds, 8 steps/ second backward. If
do not press the button for 10 seconds, the current setting will be confirmed automatically and return
to time mode.
- In setting mode, the object you set is displayed blinking.
- Mark: When alarm is turned on, the alarm symbol cannot be displayed when setting the clock.
C. ALARM SETTING:
- In alarm display mode, press "SET" 2 seconds to enter set up mode, in order "hour-minute-snooze".
- When setting, single press "UP", single step forward; press "UP" for 2 seconds, 8 steps/second forward.
Single press "DOWN", single step backward; press "DOWN" for 2 seconds, 8 steps/ second backward. If
do not press the button for 10 seconds, the current setting will be confirmed automatically and return
to time mode.
- When entering the alarm time setting, the alarm symbol will be in flashing display. When setting the
snooze time, the alarm symbol will not be in flashing display.
- In setting mode, the object you set is displayed blinking.
D. ALARM TYPE AND ON/OFF
- BUZZER alarm two minutes.
- AL: BI BI BI BI ---BI BI BI BI---BI BI BI BI ---continuing.
- Alarm frequency: 2KHZ
- When the clock display, single press "DOWN" switch alarm, turn on the alarm, the alarm symbol display.
- When the alarm is on, press "SET" to stop the alarm, enter to the snooze MODE, the corresponding alarm
symbol flashes, until the set snooze time is ringing again.
- You can press "DOWN" or "UP" to turn off the alarm or snooze, alarm symbol stops flashing.
E. SNOOZE SETTING
- Default snooze time: 5 minutes;
- In alarm setting mode, long press "SET" entering snooze time, "05" flashing display, single press "UP" or
"DOWN" to set 5-60 minutes snooze time.
- The number of snooze is unlimited.
F. NIGHT MODE SETTING
- Night mode setting: LED display automatically into the low-light display.