ENGLISH
Please install the door with following steps:
Assemble the hinge on the door with rivets(see diagram above);
4
Place the door in the position where needs to install it;
4
Put a subplate with a thickness of 5mm under the door;
4
Insert the other side of hinge into the place, and mark the position with a pencil;
4
Remove the door, then fix hinges with rivets.
4
After fix the hinge, hang the door in the knuckles from the top downwards.
This type of hinge fits both left and right sides, you can remove the axis pin to adjust
the left or right in accordance with actual requirement, please press the cap tightly on
both ends after the installation.
40