Safety Measures - Xblitz PARK VIEW 2 Bedienungsanleitung

5. Parking mode
When it's turned on, the camera left in your car (if connected to power supply)
registers the car shaking (for example, due to a parking crash), turns on and starts
recording (the recordings are automatically protected from being overwritten.)
Turning the parking mode o when driving is recommended. It can block the loop
recording function.
6. Motion detection mode. When it's turned on and you leave the camera in standby
mode, plugged to power supply, the camera will turn on and record a short video
if it detects motion.
7. Sound recording
The camera can record sound along with video footage
8. Rear camera
Park View 2 can also be used as a backup camera. After connecting the device
properly, the screen will show rear camera footage automatically whenever you
switch to reverse gear.

08. SAFETY MEASURES

1. Do not disassembly or interfere with the camera. If the device is faulty, contact
the service point.
2. Only use the original accessories.
3. Use only the original charger, included in the set. Using a di erent power supply
can a ect the battery negatively.
4. Do not use the device for purposes that are against the law of the country
or region you are in.
5. The operating temperature of the device is 0-35°C. Storage temperature
is 5°C-45°. Operating air humidity is 5-90% without condensation.
6. Avoid damaging the device with physical force.
7. Clean the device, especially the lens. Do not use detergents or other chemicals
when cleaning the device.
8. Clean the device only when it's disconnected from the power supply.
9. Keep the device away from children.
10. Do not expose the device to very high temperatures and fire.
11. If you smell burnt plastic or electronics, immediately disconnect the device from
power and contact the service point.
22