Serial 1 MOSH/CTY Bedienungsanleitung Seite 16

Tighten using multi-tool. Finalize
o
tightening with a pedal wrench
(not supplied) to 35Nm
11. Install seatpost
o Loosen clamp screw using multi-
tool
12
Insert seatpost to desired height
o
(see FIT section for additional
direction)
o Tighten to 6 Nm using torque tool
12. Install bell
o Disassemble using multi-tool
Wrap inner sleeve around
o
handlebar to the right of the right
brake handle