Serial 1 MOSH/CTY Bedienungsanleitung Seite 14

Attach both rack supports to
o
forks, making sure the rack
support arm is routed between
the fork and the brake line and
tighten to 6.5 Nm using torque
tool
6. Install front wheel
Remove front axle
o
10
Remove plastic spacer from
o
brake caliper. Avoid applying
brakes without a wheel installed
o Fold down front end of lower box
tray
o Fit brake rotor into caliper
Align and insert axle through fork
o
and wheel
o Tighten to 11 Nm using torque
tool
7. Remove any remaining ties between
eBicycle and packaging