Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CARE AND MAINTENANCE
General cleaning
We recommend cleaning the kettle after using each time.
1. Unplug the power base from the electrical outlet.
2. Allow the kettle to completely cool down, then pour out any remaining water.
3. Wash the kettle with warm, soapy water. Dry it thoroughly with a soft, clean towel.
Descaling the Kettle
You should descale the kettle at least once a week if you use it frequently. Descaling
removes any mineral deposits that have built up inside the kettle. Always descale the
kettle after it has been stored for long periods of time and before storing it.
1. Fill the kettle with 1 cup of distilled vinegar or lemon juice and 2 cups of water (1:2
ratio).
2. Boil the mixture, then let it soak in the kettle for 2 hours.
3. Pour out the solution, then wipe the limescale away with a cloth or nonabrasive
sponge.
4. Rinse the kettle with clean water, and dry with a soft cloth.
5. Repeat as needed.
TROUBLESHOOTING
Problem
Kettle will not
switch"ON"
The kettle will
not work
The LCD light
has gone out
I cannot select a
certain function
Easy solution
1. Check the power plug if is securely inserted into the outlet.
2. Insert the power plug into an independent outlet.
3. Insert the power plug into a di erent outlet.
4. Reset the circuit breaker if necessary.
5. For additional safety, the kettle is fitted with a thermal cut
out. In the event of severe
overheating, the kettle will be automatically shut down to
prevent furthe damage. If this occurs,please call DECEN
Consumer Support.
Check the glass jug if is securely positioned on the Power
Base.
1.The kettle goes into standby mode if not used for 5
minutes. When in standby mode, the LCD screen will
cease to illuminate.
2. To re-activate the kettle out of standby
mode--Press"ON/OFF" button on the Power Base.
Certain features cannot be selected or changed during
the heating or brewing cycle.The LCD screen may
temporarily change or send a sound alert
10
Werbung
Inhaltsverzeichnis
