Basic Operation; Mute Button - Blaupunkt IP 240 Bedienungsanleitung

IP 240

BASIC OPERATION

PREPARATION
1 Before the unit is turned on, please check if all the connections are right and safe.
Then connect the main power.
2 Press the POWER ON/OFF button on the back panel to turn on the main power.
STANDBY MODE AND SLEEP TIMER
Long press the button on top panel to switch ON/OFF the Standby mode.
Note: Make sure that the unit is connected to the power source.
Short press the button to set the sleep time, the unit must be playing (not in standby
mode). In order to set the timer duration you will need to press this button repeatedly
until you reach the period you require.
Note: The timer increases in increments of 10 minutes, 20 minutes, 30 minutes, 60
minutes, 90 minutes, 120 minutes, and off.
TONE FUNCTION
In play status, press TONE button on the remote control to select the Treble, Bass or
Subwoofer adjusting mode; then press the VOL.+/- button to adjust the effect of Treble,
Bass or Subwoofer.
DIRECTION BUTTONS
While playing the iPod, press the Direction buttons to move the cursor to select
the item you want.

MUTE BUTTON

If you press the MUTE button while playing, the sound output will be switch off. Press the
MUTE button again or the VOL+/- buttons to resume the previous volume level.
VOLUME SETTING
Press the VOL.+/- buttons to turn the volume up or down.
FAST FORWARD AND FAST REWIND
In SD mode, press the or button to fast rewind or fast forward. Press the button
again to resume playing mode.
In iPod mode, long press the or button to fast rewind or fast forward.
Note: These buttons are unavailable in Audio Input mode.
PREVIOUS AND NEXT
In play status, press the button to go to the previous audio file; press the button
to go to the next audio file.
Note: These buttons are unavailable in Audio Input mode.
48