Hama 00176613 Bedienungsanleitung Seite 5

• Connect the camera to a properly installed socket.
• The LED on the camera starts to flash quickly. If it
does not, press and hold the Reset button (4) on
the camera for around 5 seconds.
• Open the app and sign in.
• Press the + in the top right-hand corner to add
a new device.
My Home
• Choose Cameras from the list.
• Now confirm that the camera's LED is flashing
quickly by ticking "Next step" and clicking on
"Next".
Ensure that the QR code is at the top right.
• Next enter your WiFi password and
confirm with NEXT.
Now scan the QR code with the camera from a
distance of around 15 - 20 cm.
• As soon as you hear a signal sound, click "Signal
sound heard".
• Your camera is now connected.
Connecting Now
• Once the connection is successful, the LED stops
flashing quickly and the app confirms that your
4
camera is connected. You can now assign it a
different name if you wish.
Added successfully
• Click Finish to end the process.
• You can now operate and configure the camera.
Note: Pairing restart
Swivel the camera to the highest position. Now
press the Reset button until a signal sound is
heard. As soon as the LED starts to flash red, you
can start a further pairing attempt.
Done