Sensor Installation - Magene S314 Bedienungsanleitung

English
2. Rotation position for the battery holder
3. Installation position of the silicone pad

Sensor Installation

Notes:
1. The sensor can be switched between speed and cadence
modes by reinstalling the battery or using the Magene Utility
app. The sensor can be in only one mode.
2.Use the silicone pad or silicone ring as required by actual
conditions.
3.To prevent the sensor from being damaged or being lost
after falling off, after installing the sensor, ensure that the
sensor and the silicone ring do not have friction against your
shoes and bike.
Speed Mode
1.With the battery installed, the sensor is in speed mode if the
green indicator blinks and in cadence mode if the red
indicator blinks.
2.Install the silicone pad at the bottom of the sensor and use
the silicone ring to install the sensor on the front hub.
3.Rotate the wheels and search the sensor using a device
supporting the Bluetooth or ANT+ protocol.
Green light flashes
3