Troubleshooting; Decommissioning; Cleaning; Storage - SPYRA LX Betriebsanleitung

7. Troubleshooting

Error description
No water comes out when the trigger is
actuated.
Backhandle can no longer be moved.
Unlisted problem

8. Decommissioning

8.1. Cleaning

CAUTION!
Risk of damage
Î
Use only clean tap water for cleaning.
■ Cleaning the muzzle: Rinse the muzzle by shooting a water shot onto a non-sensitive, inanimate surface.
■ Clean water inlet: Soak dirt by submerging the water inlet in clean tap water. Then wipe the water inlet with a soft, lint-
free cloth.
■ Clean water tank: Fill the water tank with clean tap water. Empty the water tank by performing shots. Repeat this process
several times if necessary.
■ Clean surface: Wipe the surface of the SpyraLX with a soft, lint-free cloth. Use only clean tap water for this!

8.2. Storage

CAUTION!
Risk of damage
Î
Do not store with full water tank.
Î
Do not store below 5°C or above 30°C.
The SpyraLX must be completely dry and the water tank must be empty before storage.

9. Disposal

If you wish to dispose of your SpyraLX, contact your local authority for advice on disposal and recycling options.

10. Conformity

Original Declaration of Conformity | Only for European countries
Spyra GmbH declares that the device described under "Technical Data" is in conformity with all relevant regulations of the
directives 2006/42/EC, 2011/65/ EU and the following harmonized normative documents: EN ISO 12100:2010, DIN ISO/TR
14121-2.
Important note: In case of improper use, cleaning, storage or unauthorized modifications to the delivered product, this decla-
ration loses its legal validity.
München, 2021-11-01
Sebastian Walter, CEO (Authorised to compile the technical documentation)
Spyra GmbH, Tengstr. 34, 80796 Munich, Germany
4
Possible cause
Water tank is empty.
Trigger not pulled back far enough.
Backhandle is jammed.
-/-
Possible solution
Fill water tank.
Move trigger backwards until you
hear a "click" sound.
Contact customer service.
Contact customer service.