Herunterladen Inhalt Inhalt Diese Seite drucken

Lotus SMARTIME 50035/1 Bedienungsanleitung Seite 11

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
2.4 Find device
If connected, tap Find Watch in app to local-
ize the watch. The watch display lights up and
vibrate. Confirm found watch by pressing the
button.
2.5 Camera
Tap Take a photo in the app to activate re-
mote camera in the watch. Tap the Camera
icon on the watch take a photo. Pictures will
be saved in the phone gallery automatically.
2.6 Synchronization
Connect the watch with the app. It will sync
the watch data to the app automatically.
2.7 Tilt to wake
When enabling Tilt to wake in app, the watch
will light up by you tilting your wrist.
2.8 Reminder mode
In Device/More/Reminder mode you set the
way you want to be notified. Only by display,
vibration or both.
2.9 Do not disturb mode
If you wish to not be disturbed by watch for
any notifications, you enable the DND mode.
You can also set for a certain period or any
time. After entering your settings in App/De-
vice/More/Do not disturb you press save to
activate.
2.10 Alarm
Set the alarm in App/Device/More/Alarm. Af-
ter setting and saving the alarm in the app
the watch will be synced.
2.11 Time to move reminder
Set your sedentary reminder in App/Device/
More/Sedentary reminder. Set start and end
time, reminder frequency, sedentary thresh-
old, repeat time and repeating date. The
watch vibrate and sedentary icon pop up
when it is time to move.
Please be noted; Time to move reminder is
prior  to drink water reminder if the two re-
minders  are set at the same time. Then the
Drink water reminder won´t be displayed.
2.12 Drink water reminder
Set you Drink water reminder in App/Device/
More/Drink water reminder. Set start and
end time, reminder frequency and turn on
the bar of "Drink water reminder" and save.
The watch vibrates and a drinking water icon
pops up on the screen to remind you.
2.13 Watch face
1) Watch faces available in the app
When connected you can select between
several dials in the app and push it to the
watch. Go to App/Device/Watch face, select
your favorite dial by tapping and tap Sync to
watch. The watch restarts when selected Dial
is uploaded.
2) Customized Watch face
Go to App/Device/Watch face, select the
dial with a camera icon. Tap on the dial and
Chose to Take a photo or Select from album.
When ready tap Sync to watch. The watch re-
starts when the dial is synchronized.
2.14 Firmware upgrade
The watch firmware version is indicated here
and if there is a new version for the watch
it will be noticed. To update the firmware,
please follow the instructions in the app.
11
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis