Technical Data; General Power Tool Safety Warnings - Max 31139 Gebrauchsanweisung

BENCH CIRCULAR
SAW
Introduction
To get the most out of your new bench
circular saw, please read through these
instructions before use. Please also keep
the instructions in case you need to refer
to them at a later date.

Technical data

Voltage/frequency:
Power rating:
Speed:
Saw blade:
Cutting depth at 90/45°:
Bevel angle:
Bench size:
Sound pressure, LpA: 99.6 dB(A), KpA: 3 dB(A)
Sound power, LwA: 112.6 dB(A), KwA: 3 dB(A)
48
220-240 V~ 50 Hz
1500 W
5000 rpm
Ø210 mm
30 mm hole diameter
Max. 70/45 mm
0-45°
465×502 mm
General Power Tool Safety
Warnings
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains operated (corded) power tool
or battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or groun-
ded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of
electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp ed-
ges and moving parts. Damaged or entang-
led cords increase the risk of electric shock.
When operating a power tool outdoors, use