Replacing Batteries - Bresser Explorer 200RF Bedienungsanleitung

min
sec
Date/ Time Tag
Off
On

Replacing Batteries

NOTE: If the battery does not function anymore, new Li-Ion batteries will need to be installed.
Only use Li-Ion rechargeable batteries as specified in chapter „Specifications".
(1) Open the battery compartments with a screw driver. Keep the screw in a safe place so
it does not get lost. Replace the old batteries with the new 18650 batteries. Screw the
battery compartment back tightly.
(2) For your safety, it is suggested to use only legitimate, branded batteries.
Specifications
General
Viewfinder
Aspect ratio
TFT
TFT Resolution
Sensor
Photo Taking
Recording
Video Format
Aperture
Optical Magnification
Lens Diameter
IR Cutter
Optical Magnification
Digital Zoom
Total Magnification
Operation
Visual distance
Object lens Focus
Visual angle
Range-Finding Distance
Range-Finding Angle
Luminance
External Memory
Power Supply
Power Life
Press IR to move to MM, press Camera/OK to enter min set up, and use
IR or IR to select numbers. Once confirmed, press Camera/OK again.
Press IR to move to DD, press Camera/OK to enter sec set up, and use
IR or IR to select numbers. Once confirmed, press Camera/OK again.
Default setting is off
Turn on the Date/Time Tag on the recording
EVF mode
16:9
3"
360 x 640
2MP
Yes, 2MP
Yes with Micro SD card (not included)
1080P HD
F5.5 at day, F1.3 at night
6X
38mm
Automatic
6X
Up to 3X
up to 18X
Preview
200 meters (220 yards) at night, 500 meters (550 yards) at day
Manually adjustable
10.5° degrees
200 meters (220 yards); with light-colored animal skin it can be
64 meters (70 yards)
Up to 80 degrees up and down
850 Infrared LED
4GB to 64GB micro SD card compatible
Replaceable Li-Ion battery 18650 3200mAh X 2pcs (included)
Up to 10 hours for day use, 5 hours for night use
24