Air Crisp; Roast - Masterpro BGMP-9146 Bedienungsanleitung

EN

AIR CRISP

1. Place the cooking pot within the unit with the indent on the pot aligned with the main unit bump.
Place the cooking pot within the unit with the indent on the pot aligned with the main unit bump. Then
closet he lid.
2. Click the AIR CRISP button on the Window. It shows the default temperature environment. Using
the TEMP arrows up and down to set temperature.
3. Using the up and down TIME arrows to set the cook time, in approximately 1 to 90 minutes, or
follow the instructions on page 8 to adjust the temperature of the probe with the TEMP ACE button.
4. To start preheating press START / STOP. PRE appears on the screen, and the progress bar
begins. Preheat will take up to 3 minutes.
NOTE: Although preheating is highly recommended for better performance, you can skip it again by
pressing the AIR CRISP button. "Add Food" flash across the monitor. Place ingredients in the
cooking pot and open the lid. When the cover is closed, cooking begins and the timer counts down.
5. Display will show 'Add food' when preheating is completed.
6. Open the lid and place ingredients in the cooking pot. Once the hood is closed, cooking will begin
and the timer will start counting down.
NOTE: If you just want to use the temperature probe for testing your food, press TEMP button for 2
seconds and the internal temperature of the food will appear on the screen for 5 seconds. When the
screen starts flashing, you weren't holding the button long enough. Refer to Page on Troubleshooting.
11
7. We highly recommend shaking ingredients regularly for better results. When the cover is removed
the machine pauses. To shake the tub, use silicone-tipped tongs, or oven mitts. When done, close
the cover. After cover is closed, cooking should automatically resume.
8. The device will beep when cook time is through, and END appears on the display screen. Remove
the food, and close the lid. Simply click the TIME up arrow and click START / STOP to add more time
to cook the food.

ROAST

1. Place the pot in the unit with the indent on the pot matched with the bump on the main unit and
close the hood.
2. Click the button to ROAST. It shows the default temperature setting. Using the TEMP arrows up
and down to adjust temperature.
NOTE: This product is very powerful. If you find regular recipe, please reduce 10°C when using
Smokeless Grill. Frequently test the food to prevent overcooking.
3. Using the TIME arrows up and down to set the cook time, in period of 1 to 90 minutes, or follow
the instructions on page 8 to adjust the temperature of a probe using the TEMP button.
4. To start preheating press START / STOP. PRE appears on the screen, and the progress bar
begins. Preheat will take about 4 minutes.
NOTE: For better performance, though preheating is highly recommended, you can skip it by
pressing the ROAST button once more. "Add Food" flash across the screen. Place ingredients in the
12
EN